On grid wind turbine controller/On grid wind solar hybrid controller, solar inverter wind inverter manufacturers-Senwei-offer the best wind inverter solar inverter for home,grid tie inverter for residential solar panel system and small wind system

On grid wind turbine controller and On grid wind solar hybrid controller

FKJ-GT (Grid-tie) model Product Characteristics

◆ The product is manufactured according the JB/T6939.1-2004 industrial standard and GB/T 19115.1-2003 national standard also with users’ technical

requirements.

◆ Big LCD display.The images tell working state visually.Various data show: real-time wind turbine voltage、current、solar panel voltage、current、DC output voltage、current,total power generation(The main board is with button battery,in case of power failure, history data can be saved for 30 days)

◆ Two sets of control systems：PWM constant voltage system and three-phase dump load system.

◆ PWM constant voltage control is 120% of the rated power of the wind turbine. In case exceeding of PWM’s capacity, the three-phase dump load willautomatically start immediately. After 10-20 minutes, the three-phase dump load will stop and the wind turbine will re-start to resume power supply

to ensure the safe running of the overall wind turbine generation system.

◆ When the strong or super-strong wind conditions, the controller can conduct constant voltage output to ensure the inverter safety running.

◆ When the condition of disconnected grid-connected inverter, the controller can conduct constant voltage output and wait for inverter resumption.

◆ When the grid is cut off, the three-phase dump load of the controller will automatically start to work and the inverter will stop output to grid. When

the grid resuming, the controller stops three-phase dump load and the inverter will resume power supply.

◆ The inside of the controller is equipped with surge protector. Contain the over voltage into the wind turbine under the bearable voltage of the

equipment or system. On another way, to conduct the strong lightening current into the earth directly to avoid any damage of equipment.

◆ The controller is equipped with emergency stop switch; in case of emergency, press down the emergency stop button in the front panel to cut off all

power supply of the controller and the wind turbine will immediately brake（three-phase dump load）.

◆ The controller is equipped with manual three-phase dump load switch. To using this switch, the wind turbine will brake (three-phase dump load).

※ Adopt Modbus Communication protocol. Convenient to carry out the secondary development.

※ Adjusting the technical specification via RS485 is available.Convenient to adjust the different wind turbines for professional customers.

※ Support WIFI and GPRS.Customers can monitor the real-time working state of the on grid wind power system via PC and mobile and query history

working sate.Both Android and OS are compatible in Mobile.

※ Can increase the solar panel control system according to customer requirements.

※ For the different wind turbine, the controller can be equipped with mechanical yawing, rotate tail control, furled empennage, mechanical brake,

hydraulic brake, electromagnetism brake and other brake functions.

并网风力发电机(风光互补)控制器1KW-3KW

On Grid Wind Turbine (wind solar hybrid) Controller 1KW-3KW

并网风力发电机控制器/并网风光互补控制器技术参数1.5KW-3KW

Technical Parameters of the On Grid Wind Turbine (wind solar hybrid) Controller 1.5KW-3KW

型号Type	FKJ-GT1.5KW	FKJ-GT2KW	FKJ-GT3KW
风力发电机额定功率Wind turbine rated power	1.5KW	2KW	3KW
风力发电机最大功率Wind turbine Max. power	3KW	4KW	6KW
风机额定电压Wind turbine rated voltage	AC220V	AC220V	AC220V
*太阳能板功率（可选）Solar panels power (optional)	300W	600W	900W
功能Function	整流、控制、直流输出 Rectifier,control,DC output
自动保护功能Automatic protection function	过压保护、网电断电保护、稳压输出、避雷器Over voltage protection, network electric cut off protection, regulated supply output, arrester
手动功能Manual function	风机手动刹车、系统重启、应急开关 Manual brake, reset, emergency switch
显示Display mode	液晶显示LCD
显示内容Display content	风机电压、电流、功率，太阳能电压、电流、功率，直流输出电压，直流输出电流，直流输出功率，累计功率 Wind turbine voltage, current, power; Solar voltage, current, power; DC output voltage, DC output current, DC output power, total power.
PWM恒压电压 PWM constant voltage	≥320dc	≥320dc	≥320dc
风力发电机三相卸荷动作电压 Wind turbine 3-phase dump load voltage	350±5Vdc	350±5Vdc	350±5Vdc
风力发电机三相卸荷延时 Wind turbine 3-phase dump load time-lapse	12-20 min	12-20 min	12-20 min
太阳能保险 Solar panels fuse	2A	3A	4A
PWM卸荷保险PWM dump load fuse	10A	10A	16A
直流输出保险Fuse of DC output	16A	16A	20A
工作温度Work environment temperature	-30-60°C
相对湿度Relative humidity	＜90% 不结露＜90% No condensation
噪音 (1m) Noise (1m)	＜40dB
防护等级Degree of protection	IP20 (室内Indoor) IP65 (户外Outdoors)
制冷方式Cooling method	强制风冷Forced air cooling
*远程通讯（可选） Communication interface (optional)	RS485/USB/GPRS/WIFI/Ethernet
*温度补偿（可选） Temperature compensation (optional)	-4mv/°C/2V,-35°C~+80°C,精度Accuracy:±1°C
控制器尺寸Size of the controller (mm)	510360240	510360240	510360240
控制器重量Weight of the controller	15Kg	17Kg	17Kg
卸荷器尺寸Size of the dump load (mm)	410360120	410360120	400410250
卸荷器重量Weight of the dump load	7Kg	9Kg	13Kg

*Above parameter only for reference

1. Could be custom made to user specifications. 2, Could have solar power control subject to user demand.

并网风力发电机(风光互补)控制器5KW-10KW

On Grid Wind Turbine (wind solar hybrid) Controller 5KW-10KW

并网风力发电机控制器/并网风光互补控制器技术参数5KW-10KW

Technical Parameters of the On Grid Wind Turbine (wind solar hybrid) Controller 5KW-10KW

规格Type	FKJ-GT5KW	FKJ-GT5KW		FKJ-GT10KW
风力发电机额定功率Wind turbine rated power	5KW	5KW		10KW
风力发电机最大功率Wind turbine Max. power	10KW	10KW		20KW
风机额定电压Wind turbine rated voltage	AC220V	AC380-400V		AC380-400V
*太阳能板功率（可选）Solar panels power(optional)	1.5KW	1.5KW		3KW
功能Function	整流、控制、直流输出Rectifier,control,DC output
自动保护功能Automatic protection function	过压保护、网电断电保护、稳压输出、避雷器Over voltage protection, network electric cut off protection, regulated supply output, arrester
手动功能Manual function	风机手动刹车、系统重启、应急开关 Manual brake, reset, emergency switch
显示Display mode	液晶显示LCD
显示内容Display content	风机电压、电流、功率，太阳能电压、电流、功率，直流输出电压，直流输出电流，直流输出功率，累计功率 Wind turbine voltage, current, power; Solar voltage, current, power; DC output voltage, DC output current, DC output power, total power.
PWM恒压电压 PWM constant voltage	≥320dc	≥520dc		≥520dc
风力发电机三相卸荷动作电压 Wind turbine 3-phase dump load voltage	350±5Vdc	540±5Vdc		540±5Vdc
风力发电机三相卸荷延时 Wind turbine 3-phase dump load time-lapse	12-20 min	12-20 min		12-20 min
太阳能保险Solar panels fuse	5A	5A		8A
PWM卸荷保险PWM dump load fuse	25A	16A		32A
直流输出保险Fuse of DC output	32A	20A		40A
工作温度Work environment temperature	-30-60°C
相对湿度Relative humidity	＜90% 不结露＜90% No condensation
噪音 (1m) Noise (1m)	＜40dB
防护等级Degree of protection	IP20(室内Indoor) IP65 (户外Outdoors)
制冷方式Cooling method	强制风冷Forced air cooling
*远程通讯（可选） Communication interface (optional)	RS485/USB/GPRS/WIFI/Ethernet
*温度补偿（可选） Temperature compensation(optional)	-4mv/°C/2V,-35°C~+80°C,精度Accuracy:±1°C
控制器尺寸Size of the controller (mm)	510360240		510360240	580400240
控制器重量Weight of the controller	18Kg		18Kg	23Kg
卸荷器尺寸Size of the dump load (mm)	600450380		600450380	690450530
卸荷器重量Weight of the dump load	28Kg		28Kg	35Kg

*Above parameter only for reference

1. Could be custom made to user specifications. 2, Could have solar power control subject to user demand.

并网风力发电机控制器15KW-30KW

On Grid Wind Turbine Controller 15KW-30KW

并网风力发电机控制器技术参数15KW-30KW

Technical Parameters of the On Grid Wind Turbine Controller 15KW-30KW

规格Type	FKJ-GT15KW	FKJ-GT20KW	FKJ-GT30KW
风机额定功率Wind turbine rated power	15KW	20KW	30KW
风机最大功率Wind turbine Max. power	30KW	40KW	60KW
风机额定电压Wind turbine rated voltage	AC380V-400V	AC380V-400V	AC380V-400V
功能Function	整流、控制、直流输出Rectifier,control,DC output
自动保护功能Automatic protection function	过压保护、网电断电保护、稳压输出、避雷器Over voltage protection, network electric cut off protection, regulated supply output, arrester
手动功能Manual function	风机手动刹车、系统重启、应急开关 Manual brake, reset, emergency switch
显示Display mode	液晶显示LCD
显示内容Display content	风机电压、电流、功率，太阳能电压、电流、功率，直流输出电压，直流输出电流，直流输出功率，累计功率 Wind turbine voltage, current, power; Solar voltage, current, power; DC output voltage, DC output current, DC output power, total power.
PWM恒压电压 PWM constant voltage	≥520dc	≥520dc	≥520dc
风力发电机三相卸荷动作电压1 wind turbine 3-phase dump load voltage1	540±5Vdc	540±5Vdc	540±5Vdc
风力发电机三相卸荷动作电压2 wind turbine 3-phase dump load voltage2	------------	540±5Vdc	550±5Vdc
风力发电机三相卸荷2延时 Time-lapse of the wind turbine 3-phase dump load2	12-20 min	12-20 min	12-20 min
PWM卸荷保险PWM dump load fuse	50A	63A	80A
直流输出保险Fuse of DC output	63A	80A	100A
工作温度Work environment temperature	-30-60°C
相对湿度Relative humidity	＜90% 不结露＜90% No condensation
噪音 (1m) Noise (1m)	＜40dB
防护等级Degree of protection	IP20(室内Indoor) IP65 (户外Outdoors)
制冷方式Cooling method	强制风冷Forced air cooling
*远程通讯（可选） Communication interface (optional)	RS485/USB/GPRS/WIFI/Ethernet
*温度补偿（可选） Temperature compensation(optional)	-4mv/°C/2V,-35°C~+80°C,精度Accuracy:±1°C
控制器尺寸Size of the controller (mm)	580400240	650600240	650600240
控制器重量Weight of the controller	25Kg	36Kg	38Kg
卸荷器尺寸Size of the dump load (mm)	690450530	7205001300	7205001300
卸荷器重量Weight of the dump load	41Kg	70Kg	80Kg

*Above parameter only for reference

1. Could be custom made to user specifications. 2, Could have solar power control subject to user demand.

并网风力发电机控制器50KW-200KW

On Grid Wind Turbine Controller 50KW-200KW

并网风力发电机控制器技术参数50KW-200KW

Technical Parameters of the On Grid Wind Turbine Controller 50KW-200KW

规格Type	FKJ-GT50KW		FKJ-GT100KW	FKJ-GT200KW
风力发电机额定功率Wind turbine rated power	50KW		100KW	200KW
风力发电机最大功率Wind turbine Max. power	100KW		200KW	300KW
风机额定电压Wind turbine rated voltage	AC400V		AC400V	AC400V
功能Function	整流、风机控制、直流输出； Rectifier,control,DC output
自动保护功能Automatic protection function	过压保护、网电断电保护、稳压输出、避雷器Over voltage protection, network electric cut off protection, regulated supply output, arrester
手动功能Manual function	风机手动刹车、系统重启、应急开关 Manual brake, reset, emergency switch
显示Display mode	液晶显示LCD
显示内容Display content	风机电压、电流、功率，太阳能电压、电流、功率，直流输出电压，直流输出电流，直流输出功率，累计功率 Wind turbine voltage, current, power; Solar voltage, current, power; DC output voltage, DC output current, DC output power, total power.
PWM恒压电压PWM constant voltage1	≥560Vdc		≥560Vdc	≥560Vdc
PWM恒压电压PWM constant voltage2	-----------		≥560Vdc	≥560Vdc
PWM恒压电压PWM constant voltage3	-----------		-----------	≥560Vdc
风力发电机三相卸荷动作电压1 wind turbine 3-phase dump load voltage1	580±5Vdc		580±5Vdc	580±5Vdc
风力发电机三相卸荷延时1 three-phase dump load 1 delay time	12-20 min		12-20 min	12-20 min
风力发电机三相卸荷动作电压2 wind turbine 3-phase dump load voltage2	600±5Vdc		600±5Vdc	600±5Vdc
风力发电机三相卸荷延时2 three-phase dump load 2 delay time	12-20 min		12-20 min	12-20 min
风力发电机三相卸荷动作电压3 wind turbine 3-phase dump load voltage3	-----------		600±5Vdc	600±5Vdc
风力发电机三相卸荷延时3 three-phase dump load 3 delay time	-----------		12-20 min	12-20 min
PWM卸荷保险PWM dump load fuse	100A		63A*2	63A*3
直流输出保险Fuse of DC output	160A		250A	450A
自备PWM卸荷连接线Connecting wire of the PWM dump load	>20mm²		>15mm²	>15mm²
自备三相卸荷连接线 Connecting wire of the dump load	>12mm²		>16mm²	>20mm²
工作温度Work environment temperature	-30-60°C
相对湿度Relative humidity	＜90% 不结露＜90% No condensation
噪音 (1m) Noise (1m)	＜40dB
防护等级Degree of protection	IP20（室内Indoor）
制冷方式Cooling method	强制风冷Forced air cooling
*远程通讯Communication interface	RS485/USB/GPRS/WIFI/Ethernet(optional)
*温度补偿Temperature compensation	-4mv/°C/2V,-35°C~+80°C,精度Accuracy:±1°C
控制器尺寸Size of the controller (mm)	6005001200mm	6005001200mm		6005001200mm
控制器重量Weight of the controller	94Kg	96Kg		96Kg
卸荷器尺寸Size of the dump load (mm)	7205001300	7205001300(2pcs)		7205001300(2pcs)
卸荷器重量Weight of the dump load	107Kg	107Kg*2		107Kg*2

*Above parameter only for reference. Could be custom made to user specifications.

If need to get more info of s olar/wind power system for your home, please contact us:
online way: Whatsapp: +86-18806776641/ Skype: doris421pu
Email way: sales@solarpanelkitschina.com ; sales@windpowercn.com
http://www.solarpanelkitschina.com ; https://www.windpowercn.com